Geeka
En esta página, encontrarás todos los documentos, paquetes y tarjetas que ofrece el vendedor GEEKA.
- 16632
- 0
- 675
Community
- Seguidores
- Siguiendo
242 Comentarios recibidos
17319 artículos
NCCER STUDY QUESTIONS AND ANSWERS
1. Which organization requires a person to be trained in order to operate personal lifting equipment? - Answer-OSHA 
 
1. Where would the usage of a RTJ Gasket be found? - Answer-High Pressure System 
 
All of the following are examples of internal man way hardware except - Answer-Slide Fastener 
 
1. What type of wrench measures how much a fastener is being tightened? - Answer-Torque 
 
1. The fitting that makes it easy to disassemble threaded piping is - Answer-Union 
 
1. What is the purpose ...
- Examen
- • 8 páginas •
1. Which organization requires a person to be trained in order to operate personal lifting equipment? - Answer-OSHA 
 
1. Where would the usage of a RTJ Gasket be found? - Answer-High Pressure System 
 
All of the following are examples of internal man way hardware except - Answer-Slide Fastener 
 
1. What type of wrench measures how much a fastener is being tightened? - Answer-Torque 
 
1. The fitting that makes it easy to disassemble threaded piping is - Answer-Union 
 
1. What is the purpose ...
NCCER CORE FINAL QUESTIONS AND ANSWERS
Which of these is a true statement regarding safety? - Answer-Safety is a learned behavior and attitude. 
 
A measure of the probability, consequences, and exposure related to an event is referred to as _____. - Answer-Risk 
 
When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least _____. - Answer-3 feet 
 
One of the most common grounding systems used for protection against accidental electri...
- Examen
- • 4 páginas •
Which of these is a true statement regarding safety? - Answer-Safety is a learned behavior and attitude. 
 
A measure of the probability, consequences, and exposure related to an event is referred to as _____. - Answer-Risk 
 
When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least _____. - Answer-3 feet 
 
One of the most common grounding systems used for protection against accidental electri...
NCCER TEST QUESTIONS AND ANSWERS
An UL listed rod type ground electrode must have minimum length of? - Answer-8" 
 
in a circuit of pure capacitance, the current leads the voltage by an angle of? - Answer-90 Degrees 
 
The standard unit for measuring the cross-sectional area of wire is the? - Answer-Circular Mill 
 
the drawing scale is most likely to be found in the? - Answer-Drawing title block 
 
What is the minimum number of overload sensing units required for all three phase motors? - Answer-3 
 
What is the resultant dis...
- Examen
- • 2 páginas •
An UL listed rod type ground electrode must have minimum length of? - Answer-8" 
 
in a circuit of pure capacitance, the current leads the voltage by an angle of? - Answer-90 Degrees 
 
The standard unit for measuring the cross-sectional area of wire is the? - Answer-Circular Mill 
 
the drawing scale is most likely to be found in the? - Answer-Drawing title block 
 
What is the minimum number of overload sensing units required for all three phase motors? - Answer-3 
 
What is the resultant dis...
LIQUID PENETRANT LEVEL 2
Which of the following physical properties, more than any other, 
determines what makes a material a good penetrant? 
 
|A. Viscosity 
|B. Surface tension 
|C. Wetting ability 
|D. No one single property determines if a material will or will not be a good penetrant. - Answer-D - No single property determines if a material will or will not be a good penetrant 
 
The speed with which a penetrant penetrates a surface flaw is 
influenced to the greatest extent by which of the following 
properties? ...
- Examen
- • 14 páginas •
Which of the following physical properties, more than any other, 
determines what makes a material a good penetrant? 
 
|A. Viscosity 
|B. Surface tension 
|C. Wetting ability 
|D. No one single property determines if a material will or will not be a good penetrant. - Answer-D - No single property determines if a material will or will not be a good penetrant 
 
The speed with which a penetrant penetrates a surface flaw is 
influenced to the greatest extent by which of the following 
properties? ...
PENETRANT TESTING 1 TEST 1-50
Which of the following is a type of developer used in penetrant inspection? - Answer-All of the above: Dry, Aqueous particulate, and Non-aqueous particulate. 
 
Which of the following is a type of developer used in penetrant inspection? - Answer-Spraying 
 
Which of the following is a type of developer used in penetrant inspection? - Answer-Unglazed porous ceramic 
 
Which of the following penetrant systems is generally considered least sensitive? - Answer-Water washable- visible dry 
 
The fail...
- Examen
- • 4 páginas •
Which of the following is a type of developer used in penetrant inspection? - Answer-All of the above: Dry, Aqueous particulate, and Non-aqueous particulate. 
 
Which of the following is a type of developer used in penetrant inspection? - Answer-Spraying 
 
Which of the following is a type of developer used in penetrant inspection? - Answer-Unglazed porous ceramic 
 
Which of the following penetrant systems is generally considered least sensitive? - Answer-Water washable- visible dry 
 
The fail...
PT LEVEL I MULTIPLE CHOICE (120 Q'S)
Which one of the following conditions will affect the rate & the extent a liquid penetrant will enter cracks, fissures, & other small openings? 
 
a) The hardness of the specimen being tested. 
b) The surface condition of the specimen being tested 
c) The color of the penetrant 
d) The conductivity of the specimen being tested - Answer-b) The surface condition of the specimen being tested 
 
Which of the following is a commonly used classification for penetrant? 
 
a) Post-emulsifiable penetrant...
- Examen
- • 22 páginas •
Which one of the following conditions will affect the rate & the extent a liquid penetrant will enter cracks, fissures, & other small openings? 
 
a) The hardness of the specimen being tested. 
b) The surface condition of the specimen being tested 
c) The color of the penetrant 
d) The conductivity of the specimen being tested - Answer-b) The surface condition of the specimen being tested 
 
Which of the following is a commonly used classification for penetrant? 
 
a) Post-emulsifiable penetrant...
ASNT LEVEL III: LIQUID PENETRANT TESTING 4 OF 5
7.12 Liquid penetrant testing used for maintenance testing of cracks on aircraft must have the highest sensitivity. Which of the following penetrant techniques is the most sensitive? - Answer-Type I, Method B, level 3 penetrant, solvent removed, solvent suspended developer 
 
7.13 The first step in evaluating the use of penetrant on a plastic material is to: - Answer-check the compatibility of the penetrant test materials with the plastic 
 
7.14 Which of the following nonmetallic items can be t...
- Examen
- • 4 páginas •
7.12 Liquid penetrant testing used for maintenance testing of cracks on aircraft must have the highest sensitivity. Which of the following penetrant techniques is the most sensitive? - Answer-Type I, Method B, level 3 penetrant, solvent removed, solvent suspended developer 
 
7.13 The first step in evaluating the use of penetrant on a plastic material is to: - Answer-check the compatibility of the penetrant test materials with the plastic 
 
7.14 Which of the following nonmetallic items can be t...
AZ MPJE QUESTIONS AND ANSWERS
Pharmacist license renewal - Answer-Every 2 years even or odd year by 11/1 
 
AZ state board of pharmacy inspection - Answer-Must provide info within 72 hours 
 
Federal statutes referred to as - Answer-US code 
 
PIC should notify board of change in PIC or employer within ___ - Answer-24 hours (immediately = 24 hours) 
 
ASBP permits should be renewed within ___ years - Answer-2 years, on or before 11/1 
 
Prescribers with prescribing restrictions 
based on scope of practice (same as MD/DO but ...
- Examen
- • 18 páginas •
Pharmacist license renewal - Answer-Every 2 years even or odd year by 11/1 
 
AZ state board of pharmacy inspection - Answer-Must provide info within 72 hours 
 
Federal statutes referred to as - Answer-US code 
 
PIC should notify board of change in PIC or employer within ___ - Answer-24 hours (immediately = 24 hours) 
 
ASBP permits should be renewed within ___ years - Answer-2 years, on or before 11/1 
 
Prescribers with prescribing restrictions 
based on scope of practice (same as MD/DO but ...
MPJE – AZ EXAM QUESTIONS AND ANSWERS
How long is intern license valid for from date issued - Answer-5 years 
 
If intern does not complet within a period of less than 6 years, then no longer be eligible for relicense unless get board approved for re-application 
 
Report APPE/IPPE hours - Answer-by school 
 
Report self intern hours - Answer-by self 
 
annual report within 30 days of the end of calendar year 
 
Must be with a board approved pharmacy preceptor, unless hours are obtained at an alternative training site 
 
need to rep...
- Examen
- • 13 páginas •
How long is intern license valid for from date issued - Answer-5 years 
 
If intern does not complet within a period of less than 6 years, then no longer be eligible for relicense unless get board approved for re-application 
 
Report APPE/IPPE hours - Answer-by school 
 
Report self intern hours - Answer-by self 
 
annual report within 30 days of the end of calendar year 
 
Must be with a board approved pharmacy preceptor, unless hours are obtained at an alternative training site 
 
need to rep...
MPJE: ARIZONA STATE-SPECIFIC PHARMACY LAW
Who makes the rules and regulations? - Answer-The State Board of Pharmacy 
 
How many compliance officers and inspectors are in the state of Arizona? - Answer-5 compliance officers 
 
2 OTC Drug Inspectors 
 
What is the make-up of the board: How many pharmacists? How many public members? - Answer-*6 pharmacists* 
- 1 must be a hospital pharmacist 
- 1 must be a community pharmacist engaged in day-to-day practice 
*2 Public members* 
*1 Pharmacy Technician* 
 
Who appoints members to the board o...
- Examen
- • 12 páginas •
Who makes the rules and regulations? - Answer-The State Board of Pharmacy 
 
How many compliance officers and inspectors are in the state of Arizona? - Answer-5 compliance officers 
 
2 OTC Drug Inspectors 
 
What is the make-up of the board: How many pharmacists? How many public members? - Answer-*6 pharmacists* 
- 1 must be a hospital pharmacist 
- 1 must be a community pharmacist engaged in day-to-day practice 
*2 Public members* 
*1 Pharmacy Technician* 
 
Who appoints members to the board o...
ESCO HEAT PUMP EXAM
AIR CONDITIONING CERTIFICATION EXAM (EXAM CODE A-02)
Esco Electrical Test
ESCO LIGHT COMMERCIAL REFRIGERATION EXAM
Commercial Air Conditioning