Elevator Mechanic Study guides, Class notes & Summaries

Elevator Mechanic Exam 2023 Questions and Answers with Complete Solutions

LA License Elevator Test Questions and Answers

Elevator Mechanic Exam Questions with 100% Correct Answers ASME - American Society of Mechanical Engineers DOSH - Division of Occupational Safety and Health LADBS - Los Angeles Department of Building and Safety Alteration made to conveyance shall comply with ASME A17.1-204 Section - 8.7 The seismic section of ASME A17.1-2004 and alterations made to conveyances must also comply with this section - 8.4 What must be submitted to the applicable Division Elevator office prior to beginning c...

Elevator Mechanic Exam 2024 Questions with 100% Correct Answers A Latching relay: Used for call registration,direction selection or as selector relays Two types are: Set/Rest are electrical and Mechanical Latching relays Need to know latching relay symbol, Its a box with shaded triangle in lower right hand corner. - Which relay do you need to Order 710 Pg, 7 RPM = 60 ∙ ƒ ÷ P÷2 = Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2 = Take answer 1 and ÷ by answer 2 = - Know the form...

Car running up keep stopping why? - Contact is not deenergizing in push button Third-floor bulbs burn out why? - Shorted resistor Car will not travel to second floor without a third-floor me a call and will not go down from three without a second-floor hall, what's the problem? - 2Fl 4/6 Why won't motor start? - MOL1 95/96 Car doors closed and won't run what do you check? - Check for voltage at four and five Bad Transistor Top barricade can be replaced with? - 1/4" Cable

A Latching relay: Used for call registration,direction selection or as selector relays Two types are: Set/Rest are electrical and Mechanical Latching relays Need to know latching relay symbol, Its a box with shaded triangle in lower right hand corner. - Which relay do you need to Order 710 Pg, 7 RPM = 60 ∙ ƒ ÷ P÷2 = Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2 = Take answer 1 and ÷ by answer 2 = - Know the formula for RPM

ASME - American Society of Mechanical Engineers DOSH - Division of Occupational Safety and Health LADBS - Los Angeles Department of Building and Safety Alteration made to conveyance shall comply with ASME A17.1-204 Section - 8.7 The seismic section of ASME A17.1-2004 and alterations made to conveyances must also comply with this section - 8.4 What must be submitted to the applicable Division Elevator office prior to beginning construction or alterations on a conveyance Title 8 Sec 300...

Elevator Mechanic Test - Section 2 | 100% Correct Answers | Verified | Latest 2024 Version In a modernization they plan on moving the controller 30 feet away which ends up resulting in a voltage drop. What do you do? A) Call electric company for a step-up transformer, B) Use a bigger wire. - B) Use a bigger wire. Governor trips at 115% of rated speed, the over speed switch trips at 90% of the 115%. - If you are cutting something with a power saw, which way does piece you are cutt...

Elevator Mechanic Exam | 100% Correct Answers | Verified | Latest 2024 Version A Latching relay: Used for call registration,direction selection or as selector relays Two types are: Set/Rest are electrical and Mechanical Latching relays Need to know latching relay symbol, Its a box with shaded triangle in lower right hand corner. - Which relay do you need to Order 710 Pg, 7 RPM = 60 ∙ ƒ ÷ P÷2 = Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2 = Take answer 1 and ÷ by answer 2...

Elevator Mechanic Exam Review | 100% Correct Answers | Verified | Latest 2024 Version A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying...

In a modernization they plan on moving the controller 30 feet away which ends up resulting in a voltage drop. What do you do? A) Call electric company for a step-up transformer, B) Use a bigger wire. - B) Use a bigger wire. Governor trips at 115% of rated speed, the over speed switch trips at 90% of the 115%. - If you are cutting something with a power saw, which way does piece you are cutting face. Up or down? - Down. They give you a voltage of 480 on primary and 216 on secondary and a c...

A Latching relay: Used for call registration,direction selection or as selector relays Two types are: Set/Rest are electrical and Mechanical Latching relays Need to know latching relay symbol, Its a box with shaded triangle in lower right hand corner. - Which relay do you need to Order 710 Pg, 7 RPM = 60 ∙ ƒ ÷ P÷2 = Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2 = Take answer 1 and ÷ by answer 2 = - Know the formula for RPM 435 Pg. 5 If you are referring to a megohm meter, it ...