NCCCO Bundled Exams with Complete Solution | Verified Answers | 2024

Before leveling a mobile crane on outriggers, an operator should ensure: - there is no weight of the crane bearing on any tires Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - Keeping 90 degree angle between cylinder rod and pad What is...

1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? a. Boom down b. Swing c. Boom up d. Extend boom - c. 2. When hoisting personnel, within what percentage of level must a telescop...

Where is the best location for leveling a crane? - Upperworks When determining the "gross load" the best method is: - Get an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - Basket, vertical, choker What is the purpose of using a jib? - Incre...

Which area do truck cranes without a 5th outrigger generally have no lifting capacity unless the manufacturer states otherwise? - The front What is the definition of "operating radius?" - The distance from the center of rotation of the crane to the center of gravity of the load What applies to...

Splices in rail tracks shall have - Smooth Joints Hydraulic systems should have their proper fluid level checked - Daily If power fails during operations, the following shouldn't apply - Do your best to finish moving load where it was designated to go If load is undetermined who is to find out ...

1. A wire rope that is a 6x19 classification could have how many wires per strand? - 15 through 26 wires per strand 2. How often should a synthetic web sling be inspected? - Each day before use 3. Which considerations should be given to suspend lifting operations with a mobile crane? - Winds in ...

When making a multiple crane lift, it is important for the operator to understand that: - The weight may increase if the other crane lands the load If a crane is not set-up level and the operator swings a load from the high side to the low side, the load radius will: - Increase Most crane manufa...

The lattice boom is designed to take winds of up to 20 mph. from the side plus a full rated load, plus a direct side load equal to what percent of the rated load? - 2% The part of the load chart governed by stability is based on what percentage of capacity while a crawler crane is working over th...